Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
ReachFar V40 is a small anti-loss waterproof pet 3G GPS tracker. The device features GPS+LBS+AGPS +WIFI positioning, tracking by time interval, tracking on demand, trace playback, geofencing alarm, low battery alarm, SIM card change alarm, IP66 casing, 700mAh battery, and more.
Before you can use the gps tracker Reachfar you need to authorize your cell phone number of your smartphone / cell phone.
Authorization means to allow just only that number to send instruction commands to the gps tracker and to disallow requesting a location by call or sms from other numbers. This is a kind of security feature.
Don't use the number in the tracker for authorization, use the number of your cell phone (!). This authorized number is also called admin number, master number or center number. Please use the international number format (41,43,49, etc.) without leading +.
Doesn't reset with factory reset.
If the APN needs user’s name and password, for example: the user’s name is “cm”, password is “123”,
then the SMS command is “apn,apndate,cm,123,,#”
Please set main monitoring number first by sending below command from your own phone to
the tracker SIM number: pw,123456,center,your own phone number#
Change the SMS language to English, the first digital is for
language: 1 is Chinese, 0 is English.
The second digital is for timezone.
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.