Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
A=1 or 2;
1: Positioning in a regular time interval 2: Power saving mode
When A=1
T is the GPS working time interval, range: 0/5-7200 minutes. Default: 30 minutes
Sensor will be invalid in this mode.
When A=2
T is the GPS working time interval, range:10-1800 seconds. Default: 10 seconds
3 Deep sleep mode
T1: start time of waking up the GPS, format: HH:MM (Eg: 10:05)
T2: the wake up time interval (Eg: 1 hour, 2 hours, 3 hours…). Default is 24 hours.
Range: 1-24 hours
Concox AT1 is a cableless asset GPS tracker. The device features a sound detection alarm, tamper alert, 6000mAh internal Li-Pol battery, IP67 dust and waterproof casing, strong magnetic mount, etc.
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.