Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Subscription:
Active to:
ReachFar V43 Cat-1
Units in your region:
0
/ 1
ReachFar V43 Cat-1 is a small lightweight anti-loss waterproof pet LTE GPS tracker. The device features GPS+LBS+WIFI positioning, a Wi-Fi fence, a geofencing alarm, a low battery alarm, an IP67 casing, a 500mAh battery, and more.
SMS commands:
-
Authorization123456,sos1,<number of your cell phone>#
Before you can use the gps tracker Reachfar you need to authorize your cell phone number of your smartphone / cell phone.
Authorization means to allow just only that number to send instruction commands to the gps tracker and to disallow requesting a location by call or sms from other numbers. This is a kind of security feature.
Don't use the number in the tracker for authorization, use the number of your cell phone (!). This authorized number is also called admin number, master number or center number. Please use the international number format (41,43,49, etc.) without leading +.
-
IP settingsip,<ip address>,<port>#
Doesn't reset with factory reset.
-
APN settingsanp,<apn_data>#
If the APN needs user’s name and password, for example: the user’s name is “cm”, password is “123”,
then the SMS command is “apn,apndate,cm,123,,#”Please set main monitoring number first by sending below command from your own phone to
the tracker SIM number: pw,123456,center,your own phone number# -
Time zone and languagelz,0,0#
Change the SMS language to English, the first digital is for
language: 1 is Chinese, 0 is English.The second digital is for timezone.
- ReachFar V43 Cat-1
Files:
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
DNS Address:
81737.flespi.gw
IP:
185.213.2.130
Port:
31810
How to use?
Create a unit
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.
Download our mobile applications
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code
Install using store
Petovik
Your pet is happy and safe
Install by QR code
Install using store