ReachFar V30

ReachFar V30
Units in your region: 0 / 1
SMS commands:
  • Authorization
    123456,sos1,<number of your cell phone>#

    Before you can use the gps tracker Reachfar you need to authorize your cell phone number of your smartphone / cell phone.


     


    Authorization means to allow just only that number to send instruction commands to the gps tracker and to disallow requesting a location by call or sms from other numbers. This is a kind of security feature.


     


    Don't use the number in the tracker for authorization, use the number of your cell phone (!). This authorized number is also called admin number, master number or center number. Please use the international number format (41,43,49, etc.) without leading +.  

  • IP settings
    ip,<ip address>,<port>#

    Doesn't reset with factory reset.

  • APN settings
    anp,<apn_data>#

    If the APN needs user’s name and password, for example: the user’s name is “cm”, password is “123”,
    then the SMS command is “apn,apndate,cm,123,,#”


    Please set main monitoring number first by sending below command from your own phone to
    the tracker SIM number: pw,123456,center,your own phone number#

  • Time zone and language
    lz,0,0#

    Change the SMS language to English, the first digital is for
    language: 1 is Chinese, 0 is English.


    The second digital is for timezone.

ReachFar V30 is a small anti-loss waterproof pet GPS tracker. The device features GPS+LBS+AGPS +WIFI positioning, tracking by time interval, tracking on demand, trace playback, geofencing alarm, low battery alarm, SIM card change alarm, IP66 casing, 400mAh battery, and more.

The exact server address and port for your device is specified in Unit Settings on the Hardware tab.

The list of possible addresses is below:

DNS Address:
81737.flespi.gw
IP:
185.213.2.130
Port:
31810

How to use?

Create an account and Log in

Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.

Create a unit

Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.

Configure your tracker

Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.

Download our mobile applications

Ruhavik
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code Download Ruhavik
Install using store Download Ruhavik Download Ruhavik Download Ruhavik
Petovik
Petovik
Your pet is happy and safe
Install by QR code Download Ruhavik
Install using store Download Petovik Download Petovik Download Petovik