Navtelecom Smart S-2330 | GPS-Trace

Navtelecom Smart S-2330

Navtelecom Smart S-2330
Units in your region: 0 / 2
SMS commands:
  • Common settings
    SET <IP> <port> <IDo> <IDc> <apn> <login> <password> <protocol> <IMEI>

    The parameters must be separated from each other by a space or a newline character.

    The type of the parameter is determined by its position in the SMS.

    A parameter that does not contain characters will be left unchanged. If the symbol is used instead of the parameter “*”, the parameter value in the configuration file will be overwritten and the “default” parameter will be used.


    <IP> - the IP address or domain name of the server;

    <port> - server port;

    <IDo> - the identification number of the object;

    <IDc> - personal account number;

    <apn> - name of the access point of the mobile operator;

    <login> - mobile operator login;

    <password> - the password of the mobile operator;

    <protocol> - the protocol of exchange with the server. Accepted values: “F6”; “F5.2"; “FLEX”; "EGTS" – without authorization; “EGTS_A" – EGTS with authorization.

To configure the tracker, you can use the NTC Configurator.
NTC Configurator is a program designed to configure device settings, update firmware, check the operability of GSM monitoring systems of SMART, SIGNAL and ELEMENT series.

Navtelecom SMART S-2330 is a simple and cost-effective GPS/GLONASS monitoring unit. It has sensitive GLONASS/GPS antennas and a built-in battery.

The exact server address and port for your device is specified in Unit Settings on the Hardware tab.

The list of possible addresses is below:

DNS Address:

How to use?

Create an account and Log in

Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.

Create a unit

Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.

Configure your tracker

Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.

Download our mobile applications

Evaluate, analyze and control your vehicle
Install by QR code Download Ruhavik
Install using store Download Ruhavik Download Ruhavik Download Ruhavik
Your pet is happy and safe
Install by QR code Download Ruhavik
Install using store Download Petovik Download Petovik Download Petovik