Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Active to:
Concox WeTrack2
Units in your region:
0
/ 2299
SMS commands:
-
APN settingsAPN,APN's Name#The device will reply "OK" if setting successfully.
-
APN (username, password)APN,APN name,user name,password#The APN of some countries have user name and password, you may need to send SMS this command
-
IP settingsSERVER,0,IP,Port,0#It will reply "OK" after set successfully
-
DNS settingsSERVER,1,DNS,Port,0#It will reply "OK" after set successfully
-
Check the parameter settingPARAM#The replied information contains IMEI number GPS data uploading Interval, GPS working time, SOS number center number, sensor time interval, defense time and time zone info.
-
Uploading time intervalTIMER,T1,T2#T1 - ranges 5-18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 20
T2 - ranges 5-18000 or 0(seconds), upload interval when ACC OFF, 0 means no upload, default is 20
- Concox We Track2
Files:
Concox WeTrack2 is a universal GPS vehicle tracker with a wide voltage range allowing it to run equally well on electric cars, motorcycles, cars, and trucks. The device features SOS call, remote fuel/power cutoff, geo-fencing, speeding alert, historical data upload, configurable tracking modes, and more.
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
DNS Address:
53813.flespi.gw
IP:
185.213.2.30
Port:
23420
DNS Address:
1139324.flespi.gw
IP:
185.213.2.30
Port:
26909
DNS Address:
ch1187460.flespi.gw
IP:
185.213.2.30
Port:
31207
DNS Address:
23821.flespi.gw
IP:
185.213.2.30
Port:
27165
DNS Address:
36373.flespi.gw
IP:
185.213.2.30
Port:
21546
DNS Address:
10795.flespi.gw
IP:
185.213.2.30
Port:
32921
How to use?
Create a unit
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.
Download our mobile applications
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code
Install using store
Petovik
Your pet is happy and safe
Install by QR code
Install using store