Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Active to:
Concox GV20
Units in your region:
0
/ 278
SMS commands:
-
APN settingsAPN,APN's Name#
The device will reply "OK" if setting successfully.
-
APN (username, password)APN,APN name,user name,password#
The APN of some countries have user name and password, you may need to send SMS this command
-
IP settingSERVER,0,IP,Port,0#
It will reply "OK" after set successfully
-
DNS settingSERVER,1,DNS,Port,0#
It will reply "OK" after set successfully
-
Uploading time intervalTIMER,T1,T2#
T1 - ranges 5-18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 20
T2 - ranges 5-18000 or 0(seconds), upload interval when ACC OFF, 0 means no upload, default is 20
-
Check the parameter settingPARAM#
The replied information contains: IMEI number, GPS data uploading Interval, GPS working time, SOS number center number, sensor time interval, defense time and time zone info.
- Concox GV20
Files:
Concox GV20 is a feature-rich 3G GPS tracker for vehicle monitoring working over WCDMA & GSM networks. The device features remote fuel/power cutoff, ignition status detection, instant alerts, and IP65 dust and waterproof casing.
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
DNS Address:
53813.flespi.gw
IP:
185.213.2.130
Port:
23420
DNS Address:
1139324.flespi.gw
IP:
185.213.2.130
Port:
26909
DNS Address:
ch1187460.flespi.gw
IP:
185.213.2.130
Port:
31207
DNS Address:
23821.flespi.gw
IP:
185.213.2.130
Port:
27165
DNS Address:
36373.flespi.gw
IP:
185.213.2.130
Port:
21546
DNS Address:
10795.flespi.gw
IP:
185.213.2.130
Port:
32921
How to use?
Create a unit
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.
Download our mobile applications
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code
Install using store
Petovik
Your pet is happy and safe
Install by QR code
Install using store