Coban GPS311

Coban GPS311
Units in your region: 0 / 13851
SMS commands:
  • Initialization
    begin+password
    It will reply “begin ok” and initialize all the settings to default factory settings
    (default password: 123456)
  • APN settings
    APN+password + Space + your local APN
    The tracker will return the message “APN OK”
  • IP/DNS settings
    adminip+password+Space+IP(or DNS)+Space+Port
    The tracker will return the message “adminip OK”
  • Time Zone
    time+space+zone+password+space+time
    If succeed, It will reply “time OK”
    For example: to set the 0 time zone (UTC 0) send “time zone123456 0”
  • Uploading time interval
    fix030s030m***n+password
    Tracker will report a real-time location every 30
    seconds when ACC is ON, and report every 30 minutes when ACC is OFF.
    Note: The interval must not less than 1

Coban GPS311 is a waterproof motorcycle GPS tracker working in a wide voltage from 8V to 80V. The device features built-in GPS/GSM antennas, ACC / overspeeding / geo-fencing / movement / SOS / shock alarm, remote engine stop, IP67 water-resistant casing, MicroSD card support, and more.

The exact server address and port for your device is specified in Unit Settings on the Hardware tab.

The list of possible addresses is below:

DNS Address:
ch1169256.flespi.gw
IP:
185.213.2.130
Port:
23535
DNS Address:
23825.flespi.gw
IP:
185.213.2.130
Port:
21931
DNS Address:
43049.flespi.gw
IP:
185.213.2.130
Port:
21890
DNS Address:
77965.flespi.gw
IP:
185.213.2.130
Port:
21312
DNS Address:
54281.flespi.gw
IP:
185.213.2.130
Port:
21861
DNS Address:
1140212.flespi.gw
IP:
185.213.2.130
Port:
29547
DNS Address:
1151023.flespi.gw
IP:
185.213.2.130
Port:
25067
DNS Address:
113957.flespi.gw
IP:
185.213.2.130
Port:
29318
DNS Address:
11625.flespi.gw
IP:
185.213.2.130
Port:
28961
DNS Address:
33113.flespi.gw
IP:
185.213.2.130
Port:
29737

How to use?

Create an account and Log in

Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.

Create a unit

Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.

Configure your tracker

Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.

Download our mobile applications

Ruhavik
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code Download Ruhavik
Install using store Download Ruhavik Download Ruhavik Download Ruhavik
Petovik
Petovik
Your pet is happy and safe
Install by QR code Download Ruhavik
Install using store Download Petovik Download Petovik Download Petovik