Coban GPS306

Coban GPS306
Units in your region: 0 / 137
SMS commands:
  • APN settings
    APN+password + Space + your local APN

    The tracker will return the message “APN OK”.

  • Initialization
    begin+password

    It will reply “begin ok” and initialize all the settings to default factory settings (default password: 123456).

  • Uploading time interval
    fix030s***n+password

    Tracker will reply the latitude & longitude continuously at interval of 30 seconds.
    Note: the interval must not less than 20s.

  • IP settings
    adminip+password+Space+IPAddress+Space+Port Number

    The tracker will return the message “adminip OK”.

  • Time Zone
    time+space+zone+password+space+time

    If succeed, It will reply “time OK”.
    For example: to set the 0 time zone (UTC 0) send “time zone123456 0”.

Coban GPS306 is a vehicle OBDII GPS tracker working over GSM/GPRS networks (850/900/1800/1900Mhz) and GPS satellites. The device features mainteanance remind alert, low battery alarm, external power off alarm, GPS blind spot alert, geo-fencing, multi-area management, movement alarm, overspeeding alarm, voice monitor, sleep mode, sleep by time, sleep by shock sensor, GPS drift suppression, and more.

The exact server address and port for your device is specified in Unit Settings on the Hardware tab.

The list of possible addresses is below:

DNS Address:
ch1169256.flespi.gw
IP:
185.213.2.130
Port:
23535
DNS Address:
23825.flespi.gw
IP:
185.213.2.130
Port:
21931
DNS Address:
43049.flespi.gw
IP:
185.213.2.130
Port:
21890
DNS Address:
77965.flespi.gw
IP:
185.213.2.130
Port:
21312
DNS Address:
54281.flespi.gw
IP:
185.213.2.130
Port:
21861
DNS Address:
1140212.flespi.gw
IP:
185.213.2.130
Port:
29547
DNS Address:
1151023.flespi.gw
IP:
185.213.2.130
Port:
25067
DNS Address:
113957.flespi.gw
IP:
185.213.2.130
Port:
29318
DNS Address:
11625.flespi.gw
IP:
185.213.2.130
Port:
28961
DNS Address:
33113.flespi.gw
IP:
185.213.2.130
Port:
29737

How to use?

Create an account and Log in

Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.

Create a unit

Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.

Configure your tracker

Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.

Download our mobile applications

Ruhavik
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code Download Ruhavik
Install using store Download Ruhavik Download Ruhavik Download Ruhavik
Petovik
Petovik
Your pet is happy and safe
Install by QR code Download Ruhavik
Install using store Download Petovik Download Petovik Download Petovik