Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Active to:
Coban GPS303-G
Units in your region:
0
/ 13087
SMS commands:
-
Initializationbegin+passwordIt will reply “begin ok” and initialize all the settings to default factory settings
(default password: 123456） -
APN settingsAPN+password + Space + your local APNThe tracker will return the message “APN OK”
-
IP/DNS settingsadminip+password+Space+IP(or DNS)+Space+PortThe tracker will return the message “adminip OK”
-
Time Zonetime+space+zone+password+space+timeIf succeed, It will reply “time OK”
For example: to set the 0 time zone (UTC 0) send “time zone123456 0” -
Uploading time intervalfix030s030m***n+passwordTracker will report a real-time location every 30
seconds when ACC is ON, and report every 30 minutes when ACC is OFF.
Note: The interval must not less than 10s.
- Coban GPS303
Files:
Coban GPS303-G is a vehicle 2G/3G GPS tracker with voice monitor, low battery alarm, external power off alarm, GPS blind-spot alert, SOS, geo-fencing, multiple area management, movement alarm, overspeeding alarm, ACC working alarm, fuel alarm, remote cut off the oil and power system, sleep mode, configuration over USB, and more.
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
DNS Address:
ch1169256.flespi.gw
IP:
185.213.2.30
Port:
23535
DNS Address:
23825.flespi.gw
IP:
185.213.2.30
Port:
21931
DNS Address:
43049.flespi.gw
IP:
185.213.2.30
Port:
21890
DNS Address:
77965.flespi.gw
IP:
185.213.2.30
Port:
21312
DNS Address:
54281.flespi.gw
IP:
185.213.2.30
Port:
21861
DNS Address:
1140212.flespi.gw
IP:
185.213.2.30
Port:
29547
DNS Address:
1151023.flespi.gw
IP:
185.213.2.30
Port:
25067
DNS Address:
113957.flespi.gw
IP:
185.213.2.30
Port:
29318
DNS Address:
11625.flespi.gw
IP:
185.213.2.30
Port:
28961
DNS Address:
33113.flespi.gw
IP:
185.213.2.30
Port:
29737
How to use?
Create a unit
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.
Download our mobile applications
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code
Install using store
Petovik
Your pet is happy and safe
Install by QR code
Install using store