Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Active to:
Coban GPS104
Units in your region:
0
/ 183
SMS commands:
-
Initializationbegin+password
It will reply “begin ok” and initialize all the settings to default factory settings (default password: 123456）
-
APN settingsAPN+password + Space + your local APN
The tracker will return the message “APN OK”
-
IP/DNS settingsadminip+password+Space+IP(or DNS)+Space+Port
The tracker will return the message “adminip OK”
-
Time Zonetime+space+zone+password+space+time
If succeed, It will reply “time OK”
For example: to set the 0 time zone (UTC 0) send “time zone123456 0”
-
Uploading time intervalfix030s030m***n+password
Tracker will report a real-time location every 30 seconds when ACC is ON, and report every 30 minutes when ACC is OFF.
Note: The interval must not less than 1
- Coban GPS104
Files:
Coban GPS104 is a vehicle GPS tracker with a powerful magnetic mount and large capacity battery. The device features a 6000mAh Li-Pol battery, geofencing, multi-area management, movement alarm, overspeeding alarm, shock sensor alarm, power off alarm, sleeping mode, GPS drift suppression, and a lot more.
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
DNS Address:
ch1169256.flespi.gw
IP:
185.213.2.30
Port:
23535
DNS Address:
23825.flespi.gw
IP:
185.213.2.30
Port:
21931
DNS Address:
43049.flespi.gw
IP:
185.213.2.30
Port:
21890
DNS Address:
77965.flespi.gw
IP:
185.213.2.30
Port:
21312
DNS Address:
54281.flespi.gw
IP:
185.213.2.30
Port:
21861
DNS Address:
1140212.flespi.gw
IP:
185.213.2.30
Port:
29547
DNS Address:
1151023.flespi.gw
IP:
185.213.2.30
Port:
25067
DNS Address:
113957.flespi.gw
IP:
185.213.2.30
Port:
29318
DNS Address:
11625.flespi.gw
IP:
185.213.2.30
Port:
28961
DNS Address:
33113.flespi.gw
IP:
185.213.2.30
Port:
29737
How to use?
Create a unit
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.
Download our mobile applications
Ruhavik
Evaluate, analyze and control your vehicle
Install by QR code
Install using store
Petovik
Your pet is happy and safe
Install by QR code
Install using store