Create an account and Log in
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
ATrack AX9 is a 2G/3G GPS tracking unit for fleet management of both passenger vehicles and heavy-duty trucks supporting Bluetooth connectivity, driving behavior event management, OBD/CAN Bus data collection and a lot more.
<Enable>: Enable GPRS/UMTS connection (0: Disable, 1: Enable)
<"APN">: Access Point Name
<"User Name">: The GPRS/UMTS user name
<"Password">: The GPRS/UMTS password
<"Host address">: Address of remote host. This parameter can be either IP address "xxx.xxx.xxx.xxx" or domain name of host server. When the domain name is specified, the DNS server is used the default DNS from the carrier.
<Host Port>: Port number of the remote host server
<Socket Type>: Communication protocol (0: TCP, 1: UDP)
The device AT commands can be sent through RS232 port, SMS or GPRS TCP/UDP. The HyperTerminal is one of the most popular RS232 Terminal Emulator in Windows Platform. The other similar RS232 terminal emulator software can perform the same result.
The exact server address and port for your device is specified in Unit Settings on the Hardware tab.
The list of possible addresses is below:
Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.
Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.
Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.