Utwórz konto i zaloguj się
Wystarczy zarejestrować się na platformie GPS-Trace. Pobierz aplikację, która najbardziej Ci odpowiada! Wprowadź nazwę użytkownika i hasło określone podczas rejestracji.
Before you can use the gps tracker Reachfar you need to authorize your cell phone number of your smartphone / cell phone.
Authorization means to allow just only that number to send instruction commands to the gps tracker and to disallow requesting a location by call or sms from other numbers. This is a kind of security feature.
Don't use the number in the tracker for authorization, use the number of your cell phone (!). This authorized number is also called admin number, master number or center number. Please use the international number format (41,43,49, etc.) without leading +.
Doesn't reset with factory reset.
If the APN needs user’s name and password, for example: the user’s name is “cm”, password is “123”,
then the SMS command is “apn,apndate,cm,123,,#”
Please set main monitoring number first by sending below command from your own phone to
the tracker SIM number: pw,123456,center,your own phone number#
Change the SMS language to English, the first digital is for
language: 1 is Chinese, 0 is English.
The second digital is for timezone.
ReachFar V30 is a small anti-loss waterproof pet GPS tracker. The device features GPS+LBS+AGPS +WIFI positioning, tracking by time interval, tracking on demand, trace playback, geofencing alarm, low battery alarm, SIM card change alarm, IP66 casing, 400mAh battery, and more.
Dokładny adres serwera i port dla twojego urządzenia są określone w Ustawieniach jednostki na karcie Sprzęt.
Lista możliwych adresów znajduje się poniżej:
Wystarczy zarejestrować się na platformie GPS-Trace. Pobierz aplikację, która najbardziej Ci odpowiada! Wprowadź nazwę użytkownika i hasło określone podczas rejestracji.
Utwórz obiekt na swoim koncie!Wybierz typ urządzenia, ustaw unikalny identyfikator i uzyskaj adres serwera oraz port do podłączenia urządzenia.
Skonfiguruj swój tracker, aby wysyłał dane na adres serwera i port otrzymany podczas tworzenia urządzenia. Gdy tylko tracker zacznie wysyłać dane na serwer, urządzenie zostanie natychmiast wyświetlone w aplikacji.