Concox GV20

Units in your region: 5 / 213

Concox GV20 is a feature-rich 3G GPS tracker for vehicle monitoring working over WCDMA & GSM networks. The device features remote fuel/power cutoff, ignition status detection, instant alerts, and IP65 dust and waterproof casing.

  • Vehicle tracker
SMS commands:
  • APN settings
    APN,APN's Name#

    The device will reply "OK" if setting successfully.

  • APN (username, password)
    APN,APN name,user name,password#

    The APN of some countries have user name and password, you may need to send SMS this command

  • IP setting
    SERVER,0,IP,Port,0#

    It will reply "OK" after set successfully

  • DNS setting
    SERVER,1,DNS,Port,0#

    It will reply "OK" after set successfully

  • Uploading time interval
    TIMER,T1,T2#

    T1 - ranges 5-18000 or 0(seconds), upload interval when ACC ON, 0 means no upload, default is 20


    T2 - ranges 5-18000 or 0(seconds), upload interval when ACC OFF, 0 means no upload, default is 20

  • Check the parameter setting
    PARAM#

    The replied information contains: IMEI number, GPS data uploading Interval, GPS working time, SOS number center number, sensor time interval, defense time and time zone info.

The exact server address and port for your device is specified in Unit Settings on the Hardware tab.

The list of possible addresses is below:

DNS Address:
53813.flespi.gw
IP:
185.213.2.30
Port:
23420
DNS Address:
1139324.flespi.gw
IP:
185.213.2.30
Port:
26909
DNS Address:
23821.flespi.gw
IP:
185.213.2.30
Port:
27165
DNS Address:
36373.flespi.gw
IP:
185.213.2.30
Port:
21546
DNS Address:
10795.flespi.gw
IP:
185.213.2.30
Port:
32921

How to use?

Create an account and Log in

Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.

Create a unit

Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.

Configure your tracker

Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.

Unduh aplikasi seluler kami

Ruhavik
Ruhavik
Mengevaluasi, Menganalisis, serta mengontrol kendaraan Anda
Pasang menggunakan kode QR Download Ruhavik
Pasang menggunakan store aplikasi Download Ruhavik Download Ruhavik Download Ruhavik
Petovik
Petovik
Peliharaan Anda jadi senang dan aman
Pasang menggunakan kode QR Download Ruhavik
Pasang menggunakan store aplikasi Download Petovik Download Petovik Download Petovik