Coban GPS303-G

Units in your region: 0 / 10957

Coban GPS303-G is a vehicle 2G/3G GPS tracker with voice monitor, low battery alarm, external power off alarm, GPS blind-spot alert, SOS, geo-fencing, multiple area management, movement alarm, overspeeding alarm, ACC working alarm, fuel alarm, remote cut off the oil and power system, sleep mode, configuration over USB, and more.

  • Vehicle tracker
SMS commands:
  • Initialization
    begin+password
    It will reply “begin ok” and initialize all the settings to default factory settings
    (default password: 123456)
  • APN setting
    APN+password + Space + your local APN
    The tracker will return the message “APN OK”
  • IP/DNS settings
    adminip+password+Space+IP(or DNS)+Space+Port
    The tracker will return the message “adminip OK”
  • Time Zone
    time+space+zone+password+space+time
    If succeed, It will reply “time OK”
    For example: to set the 0 time zone (UTC 0) send “time zone123456 0”
  • Uploading time interval
    fix030s030m**n+password
    Tracker will report a real-time location every 30
    seconds when ACC is ON, and report every 30 minutes when ACC is OFF.
    Note: The interval must not less than 10s.

The exact server address and port for your device is specified in Unit Settings on the Hardware tab.

The list of possible addresses is below:

DNS Address:
23825.flespi.gw
IP:
185.213.2.30
Port:
21931
DNS Address:
43049.flespi.gw
IP:
185.213.2.30
Port:
21890
DNS Address:
77965.flespi.gw
IP:
185.213.2.30
Port:
21312
DNS Address:
54281.flespi.gw
IP:
185.213.2.30
Port:
21861
DNS Address:
1140212.flespi.gw
IP:
185.213.2.30
Port:
29547
DNS Address:
113957.flespi.gw
IP:
185.213.2.30
Port:
29318
DNS Address:
11625.flespi.gw
IP:
185.213.2.30
Port:
28961
DNS Address:
33113.flespi.gw
IP:
185.213.2.30
Port:
29737

How to use?

Create an account and Log in

Simply register in GPS-Trace platform. Download the app that suits you best! Enter the username and password that you specified during registration.

Create a unit

Create a unit in your account! Select your device type, set a unique ID and get the server address and port for connecting the device.

Configure your tracker

Configure your tracker to send data to the server address and port received when the unit was created. As soon as your tracker starts sending data to the server, the unit will immediately be displayed in the application.

Unduh aplikasi seluler kami

Ruhavik
Ruhavik
Mengevaluasi, Menganalisis, serta mengontrol kendaraan Anda
Pasang menggunakan kode QR Download Ruhavik
Pasang menggunakan store aplikasi Download Ruhavik Download Ruhavik Download Ruhavik
Petovik
Petovik
Peliharaan Anda jadi senang dan aman
Pasang menggunakan kode QR Download Ruhavik
Pasang menggunakan store aplikasi Download Petovik Download Petovik Download Petovik