Cree una cuenta e inicie sesión
Simplemente hay que registrarse en la plataforma GPS-Trace. Descargue la aplicación que más le convenga. Ingrese el nombre de usuario y contraseña que usted ha indicado durante el registro.
Before you can use the gps tracker Reachfar you need to authorize your cell phone number of your smartphone / cell phone.
Authorization means to allow just only that number to send instruction commands to the gps tracker and to disallow requesting a location by call or sms from other numbers. This is a kind of security feature.
Don't use the number in the tracker for authorization, use the number of your cell phone (!). This authorized number is also called admin number, master number or center number. Please use the international number format (41,43,49, etc.) without leading +.
Doesn't reset with factory reset.
If the APN needs user’s name and password, for example: the user’s name is “cm”, password is “123”,
then the SMS command is “apn,apndate,cm,123,,#”
Please set main monitoring number first by sending below command from your own phone to
the tracker SIM number: pw,123456,center,your own phone number#
Change the SMS language to English, the first digital is for
language: 1 is Chinese, 0 is English.
The second digital is for timezone.
ReachFar V40 is a small anti-loss waterproof pet 3G GPS tracker. The device features GPS+LBS+AGPS +WIFI positioning, tracking by time interval, tracking on demand, trace playback, geofencing alarm, low battery alarm, SIM card change alarm, IP66 casing, 700mAh battery, and more.
La dirección de servidor exacta y el puerto para tu dispositivo se especifican en la configuración de la unidad en la pestaña de hardware.
A continuación figura la lista de posibles direcciones:
Simplemente hay que registrarse en la plataforma GPS-Trace. Descargue la aplicación que más le convenga. Ingrese el nombre de usuario y contraseña que usted ha indicado durante el registro.
Cree una unidad en la cuenta de usted. Escoja el tipo de su dispositivo, establezca un ID único y obtenga la dirección y puerto del servidor para conectar el dispositivo.
Configure su rastreador para que envíe datos a la dirección y puerto del servidor que usted ha obtenido cuando se ha creado la unidad. La unidad se mostrará en la aplicación inmediatamente.