Xexun TK103-2

Rating by users

Supported capabilities:

Please, use the next IP/port in order to connect this device to our GPS tracking system

Server IP:
Server port: 20462

To make the platform identify data from your device please put the next information in the appropriate fields while creating an unit in the system:

Unique ID: imei
Phone number: Phone number of device's SIM card in the international format, starting from '+'

In order to configure the object, you have to follow these steps by sending SMS commands to the tracker:

  • "begin123456" - resets all controller's settings, password 123456 is set by default
  • make a call to the controller, which should wait untill two beeps, break the call and send SMS with it's coordinates
  • "apn123456 mts" - sets the required apn for gprs configuration
  • "apnuser123456 mts" - sets the user for gprs configuration
  • "apnpasswd123456 mts" - sets the password for gprs configuration. For new equipment versions user and password are set with one command "admin123456 mts mts"
  • "GPRS123456" - we're setting GPRS mode
  • "adminip123456 <IP> 20462" - sets the server's address for packages sending, <IP> replace for IP of monitoring system
  • "t030s***n123456" - sets the interval of messages sending to 30 seconds. For new equipment versions this command can have the following format "fix030s***n123456"

You can also download an example of object configuration file for Xexun TK103-2 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.