- ADC sensors
- Digital sensors
- Communication via TCP
- Communication via UDP
- Built-in odometer
- Remote management via GPRS
- Remote management via SMS
- SMS sending of data
- iButton support
- CAN-bus support
- Garmin support
Please, use the next IP/port in order to connect this device to our GPS tracking system
To make the platform identify data from your device please put the next information in the appropriate fields while creating an unit in the system:
|Unique ID:||IMEI (15 digits)|
|Phone number:||Phone number of device's SIM card in the international format, starting from '+'|
You can also download an example of Teltonika FM4200 configuration file to connect it to Wialon GPS tracking software.
Instruction on configuring Teltonika FM4200 via TCP.
You can also download an example of object configuration file for Teltonika FM4200 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with sensors.
For communication via SMS, enter "login password" defined for the device and divided by the space in the "Device access password" field of the GPS unit in Wialon GPS tracking software.
To support «24 SMS in 1» mode, the interval between the points should be 900 seconds as it is on the server, i.e. the value should be 900000 ms in the device configuration.
You can connect Garmin device to communicate with driver.
To do this you must change options "Profile change on event" to "Disable" and "Record Refresh Timeout" to 259200 on page "Global parameters" in the configurator software.
These settings are needed for device to maintains a connection to the server after uploading of accumulated data and waiting for messages from the server.
Garmin firmware version should be 5.40 or higher.
I/O elements are additional source of information and are registered together with GPS data.